features surge overload rating - 135 amperes peak ideal for printed circuit board reliable low cost construction utilizing molded plastic technique the plastic material has ul flammability classification 94v-0 mounting postition:any maximum ratings and electrical characteristics 4gbj 4gbj 4gbj 4gbj 4gbj 4gbj 4gbj 4005 401 402 404 406 408 410 maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward (with heatsink note 2) rectified current @ t c =100 (without heatsink) peak forward surge current 8.3ms single half sine-wave super imposed on rated load (jedec method) maximum forward voltage at 2.0a dc v f v maximum forward voltage at 4.0a dc v f v maximum dc reverse current @ t j =25 at rated dc blocking voltage @ t j =125 i 2 t rating for fusing (t<8.3ms) i 2 t a 2 s typical junction capacitance per element (note1) c j pf typical thermal resistance r jc /w operating temperature range t j storage temperature range t stg notes: 1.measured at 1.0mhz and applied reverse voltage of 4.0v dc. 2.device mounted on 50mm*50mm*1.6mm cu plate heatsink. 3. the typical data above is for reference only -55 to +150 500 75.63 45 2.2 -55 to +150 1.1 10.0 i r a i fsm 135 a 1.0 characteristics symbol unit i (av) 4.0 a 2.4 dimensions in inches and (milimeters) rating at 25 ambient temperature unless otherwise specified. single phase, half wave ,60hz, resistive or inductive load. for capacitive load, derate current by 20% 4GBJ4005 thru 4gbj410 reverse voltage - 50 to 1000 volts forward current - 4.0 amperes glass passivated bridge rectifiers 4gbj ? .134(3.4) ? .122(3.1) spacing .303(7.7) .287(7.3) .287(7.3) .303(7.7) .303(7.7) .287(7.3) ? .122(3.1) ? .134(3.4) .023(0.6) .031(0.8) .114(2.9) .098(2.5) .150(3.8) .134(3.4) .173(4.4) .189(4.8) .382(9.7) .366(9.3) .157 (4.0) .669(17.0) .708(18.0) .150(3.8) .130(3.3) .074(1.9) .059(1.5) .035(0.9) .043(1.1) .083(2.1) .069(1.7) .041(1.05) .057(1.45) .578(14.7) .602(15.3) .995(25.3) .983(24.7) - ~~ + .118(3.0)*45
rating and charactertic curves 4GBJ4005 thru 4gbj410 fig.1-forward current derating curve case temperature, c average forward current amperes 75 125 150 0.0 1.0 5.0 100 50 25 3.0 4.0 2.0 single phase half wave 60h z resistive or inductive load with heatsink without heatsink number of cyclets at 60hz peak forward surge current, amper es fig.2-maximum non-repetitive surge current 0 10 100 0 25 50 100 2 50 20 5 75 125 150 single half-sine-wave (jedec method) t j =25c half-sine-wave (jedec method) instantaneous forward voltage,volts instantaneous forward current,(a) fig.3-typical forward characteristics 0.01 0.1 1.0 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 t j =150c t j =25c instantaneous reverse current, (ua) fig.4-typical reverse characteristics percent of rated peak reverse o g (%) 100 10 1.0 0.1 0 40 60 80 100 120 140 20 1000 t j =150c t j =125c t j =100c t j =25c fig.5-typical junction capacitance reverse voltage,(volts) capacitance,(pf) 10.0 100 1.0 10 100 50 t j =25c,f=1mh z
|
